Netgear is a well know brand that distributes networking devices like routers, extenders, and mesh router systems. The routers can be connected to any modem and extenders can be connected to any brand router.
These networking devices are easily installed in your home, but in this article, we will discuss only about the WiFi range extender. Netgear extenders can be used after connecting with the router via Ethernet cable or you can also link it using the WPS button. After the hardware connection with the router, you just have to access the interface and adjust the settings.
But, if you didn’t follow all the troubleshooting tips that are mentioned in the user manual then you can face troubles like Netgear www.mywifiext.net refused to connect. Here in this article, you will see possible reasons that can cause this issue. After explaining the reasons, we will provide solutions to the problem.
Why Netgear Range Extender Interface Not Working?
Here in this section of the article, you will read reasons why your Netgear WiFi range extender interface is not responding. We will list up causing factors in this section.
- The biggest reason behind this type of problem is incorrect router to extender connection via Ethernet cable.
- One other causing factor of mentioned issue is using damaged cable and wall socket for connections and supply power.
- Using the outdated web browser version to log in to the Netgear extender can be a reason why you can’t reach the interface.
- Using incorrect login URL address and wrong login credentials to access the interface can cause the similar problem.
- Weak internet and network connection through the extender can be a reason of the interface cannot be reached issue.
So, these are the possible reasons why mywifiext.net is not working. Now, let’s solve this problem with the help of some troubleshooting tips and solutions.
How to Solve ‘Interface Refuse to Connect’ Issue?
In this section, you will learn some tips to dispel the interface not working or refuse to connect issue. Let’s start one by one.
1. Correct Router to WiFi Extender Link
The router is a networking device that has limited reach of the WiFi signals. People use extenders to expand the range of the router. So, you should connect the router to extender correctly at the time of Netgear WiFi extender setup. The pattern of connection is WAN port of the extender and LAN port of the router.
2. Don’t use Damaged Ethernet Cable
Ethernet cable is used to connect the router with the WiFi extender. So, you have to check that cable is in good condition. If you found the cable damaged or cut, then you have to replace it to a new one. Also ensure that the wall socket in which you plug the extender in to supply power is in good condition.
3. Update Browser And Then Try
You must use an updated web browser to access the interface of the Netgear range extender. If you want to update the browser just follow some steps written down here.
- Go to the browser and click the settings of it.
- In the settings, select the ABOUT>click on the UPDATE button.
4. Reboot Netgear Extender
If no above written solutions not working, then in that situation, you have to perform a rebooting process on the Netgear WiFi range extender.
- To restart the networking devices you just have to unplug the extender.
- Then, plug it into the electric wall socket again to restart the Netgear device.
At The End
Here we have gone through the possible reasons why your Netgear WiFi extender interface is not working. We have provided solutions and troubleshooting tips that help you dispel the mentioned technical issue.