Did you try to upgrade the firmware of your Amped wireless range extender to its latest version by accessing the Amped wireless extender setup wizard but failed to complete the process? Well, that is sad. But, know that there is nothing to worry about. The reason being, in this article, we have penned down some of the best troubleshooting tips following which you will be able to get rid of the issue at hand in no time. Taking this into account, you ought to continue reading this article.
[Fixed] Amped Extender Firmware Update Failed Issue
Follow the Right Instructions
The primary reason why you failed to complete the Amped extender firmware update process is because you were not being careful while walking through the instructions to execute it. But, the good thing is that it is still not late to rectify your mistake.
Walk through the instructions that are highlighted in the user manual of your Amped wireless range extender and learn how to update its firmware to its most recent version. See if following this troubleshooting hack works for you.
Although it will, on the off chance, it refuses to; it is recommended that you go through the next troubleshooting hack. Just because one hack could not help you do not mean that the others will also force you to have the same fate.
Download the Correct Version
Another reason why you are experiencing the Amped extender firmware update failed issue is because you downloaded the wrong firmware version, the one that is not compatible with the extender model that you own.
Taking this into consideration, it is suggested that you try to update the firmware of your networking device again. This time, make sure that you download the correct version. What is that? Are you not sure which model you own?
Well, you can again make use of the user manual of your networking device. Starting from the model number to the steps needed to perform Amped extender reset; this little book has everything that you need about your networking device.
Check the Internet Connection
In case you are still not able to do Amped extender firmware update with ease, then it might be because of a weak internet connection. A weak internet connection might have been caused because your Internet Service Provider is not doing his job properly.
To set him straight, you need to get in touch with him. If he does agree that the internet issue is from his end, give him some time to get it fixed. As soon as you have started receiving a good internet speed, consider updating the firmware of your device.
Do not tell us that this did not work for you either? Unfortunately, if the answer to this question is a yes, then you ought to walk through the last troubleshooting hack outlined in this article. It is your last resort to fix the issue at hand.
Reset the Amped Extender
Resetting your Amped wireless range extender is possible if you locate the Reset button located on it and press it carefully. It is recommended that you wait for some time for your device to get restored to its default mode properly.
To finish the reset process, your device will restart. Do not interrupt the process. Otherwise, the reset process will get interrupted and no matter what you do, you will not be able to put an end to the Amped extender firmware update failed issue.
For your information, if you do not want to reset your networking device using the hard method, you can use the soft reset method. For that, you have got to access the web user interface of the device that you own. Then, setup Amped wireless extender.
With the last troubleshooting hack, we are putting an end to this guide written on how to resolve the Amped extender firmware update failed issue. Hopefully, one of the hacks given above helped you to update the firmware of your networking device to its latest version with ease. If they did, then waste no more time sharing a couple of words of appreciation with your fellow readers. The same can be done if you make use of the comment section.