No matter whether you have already installed your Netgear extender or are on the quest to set it up via the mywifiext login address, all you have to look for on your computer’s Network and Internet Settings is Netgear_ext. For your information, it is the default network name, also known as, SSID of a Netgear WiFi range extender. If it does not show up on the computer, then it will become an impossible task for you to carry out some tasks especially when it comes to managing the Netgear extender network. We have already mentioned that the problem can arise with users with an extender that is set up or with the extender that is being installed. Therefore, if you are one of those users, it is recommended that you take the help of the troubleshooting solutions provided in this write-up. Keep reading.
Is Your Netgear Extender Getting Proper Power Supply?
If your Netgear extender won’t show up on any of networking devices, then the first thing you should check is whether it is properly powered up or not. To check the same, pay attention to the Power light. Is it solid green? If not, there is a high chance that the extender is switched off. It generally happens when the Netgear extender is connected to a socket that is not capable of supplying proper electricity.
Thus, all you have to do is change the power socket that is supplying power to your extender. It must be non-damaged. On the off-chance, nothing is wrong with the power socket, you should use a UPS. This is because there is a probability that the power-related issue has arisen from the backend.
But, what will you do if the Netgear extender is not showing up because of some other reasons? In that case, you should learn about them with the help of the information provided further in this post know what to do in that case.
Fixed: Netgear Extender Won’t Show Up
- Restart the Extender: Restarting the extender should be in your troubleshooting list if the issue is not related to power. There are chances that the extender is not appearing on WiFi networks list because of network errors. You can kick them off by rebooting the extender. Simply, disconnect it from the main router first and then press the Power button. You can also unplug it from its respective power outlet. Wait for some time. For example, 15 minutes. After that, switch on your extender and connect it back to the main WiFi router using the Ethernet cable.
- Change the Extender’s Location: Is your Netgear range extender placed in a bottlenecked area? If you have answered this question in yes, then there is no wonder why your Netgear extender won’t show up. Keep in mind that placing the range extender in an area that is congested is a sign that you have restricted its signal propagation. Therefore, you should immediately change its location. While you do that, just make sure that you are not giving your extender a space near a device that operates via electromagnetic induction or an object that consists of a large amount of water. A safe distance from thick concrete walls and metal objects must also be maintained.
- Enable the SSID Broadcast: Did you wonder that your extender is not showing up because you have not enabled SSID broadcast? Yes, when the extender’s SSID broadcast is disabled, you cannot see its network name on any WiFi list. In this scenario, you have to add the extender’s network manually on your client device. But, it won’t be possible if you do not remember the exact SSID of the extender. The best solution in this case is to enable the SSID broadcast on the extender. You can do this by accessing the default IP address 192.168.1.250. But, make sure that you use a wired connection between your Netgear extender and computer for this purpose.
The Final Words
Occasions arrive when the Netgear extender won’t show up on the WiFi list of a networking device. But, it does not mean that you give up. You can try the hacks given in the post. Just in case all the techniques mentioned here fail to work in your favor, it is a sign that some serious problem has affected your extender’s ability to work well. Thus, you have to reset the range extender and set it up once again.