Only a small percentage of users are happy with the WiFi performance delivered by their networking devices. Just in case, you are not among those happy users, then there is a high possibility that your WiFi repeater is slow. To make it high-performing or to escalate its performance, we have penned down this post explaining a few hacks to overcome slow WiFi issues. It is suggested that you stay ready to access the Wireless-N WiFi repeater setup wizard if the troubleshooting process demands you to do so. Stay connected to the reading.
Reasons and Solutions: WiFi Repeater is Slow
Reason 1: Technical Glitches
Technical glitches are the prime reasons that force a networking device to kneel down in terms of performance. There are chances that your Wireless-N repeater has met the same fate.
Solution1: To make things better, you are advised to restart the extender/ WiFi repeater as a solution. Restarting won’t require much effort as well as knowledge. You just need to disconnect the repeater from the router (if there’s a LAN connection), press the repeater’s power button, and wait for some time. This some time is supposed to range from 10-20 minutes. Lastly, you need to do the exact opposite of what you did before providing rest to the extender.
Reason 2: Improper Placement
When we use the term improper placement with respect to the repeater, we generally refer to the surrounding that might be housing various factors that create WiFi interference. There is also a high possibility that you have placed your Wireless-N repeater in a corner or near a concrete wall.
Solution 2: Changing the location of the repeater is recommended in this scenario. Pick up your Wireless –N repeater and keep it in a ventilated room. However, this is not the only condition. You are also advised to ensure that your repeater is kept away from devices like microwave ovens, televisions, refrigerators, washing machines, Bluetooth speakers, etc. You also need to make sure that the repeater is at a safe distance from reflexive surfaces, reflexive surfaces, aluminum studs, metal doors, aquariums, and masonry constructions.
Reason 3: Outdated Firmware
The repeater might act slow if the firmware on which it is running has become outdated. This must be known to you that all devices in the networking realm run on a firmware that controls its hardware and software-related activities.
Solution: The solution is quite clear from the reason itself. All you have to do is upgrade the repeater’s firmware. You can do this by accessing the repeater’s dashboard on a device (PC/laptop) connected to its network. The instructions related to the firmware update process can be seen from the user manual. For your information, the user manual of a repeater consists of everything including the Wireless-N WiFi repeater setup instructions and reset instructions. However, during the firmware update process, you need to ensure that the firmware file uploaded by you is original. In other words, it must belong to the WiFi repeater model you own.
Summing Up
This was all about what to do if you’re facing slow WiFi speed issues with your Wireless-N WiFi repeater. We hope that after you’re done giving a shot at the techniques mentioned in the write-up, you will be able to get the problem resolved.
On the off-chance, the WiFi performance offered by your Wireless-N WiFi repeater is still slow, you are not restricted to these hacks only. You are suggested to pull out the ultimate hack of performing a factory default reset of the repeater in that scenario. It can be done with the help of the Reset button present on the repeater. However, do not forget to set up the repeater once again after that.