There have been instances when the TP–Link range extender users report issues with slow internet and poor download speed. Do you also fall into the same category of users who are going through a similar situation? Well, if you are nodding your head, then it is now time that you get rid of the problem. The topmost working solutions have been listed in this article. You simply need to walk through them, follow them and do away with the issue under discussion. For your information, some of the hacks provided in this guide will require you to access the TP Link WiFi extender login page, thus keep the login details handy for the same.
TP-Link Slow Download Speed: Solved
- Have Separate SSIDs
You need to make sure that you have separate SSIDs (network names) for both the TP-Link range extender and the host router. This is because this way you do not know which network is being accessed by the device you are currently using. In case you have been using the same SSID for both networking devices till date, then it is now time you change them. Always use the correct network and then see if the issue is getting addressed or not.
- Check Internet Speed
You should do a speed check now. Have only one device accessing the TP-Link extender network and then do a speed test. Do the same with the host router. In case you find something wrong with the router speed, then contact your ISP to verify an issue from his end. Give him some time to get the issue fixed.
- Connect Networking Devices Wisely
How have you connected the TP-Link extender to the host router is another important point that you are going to consider now. If the connection between them is wireless then we suggest you use a wired connection now. This is because the wired connection ensures a more stable network. Thus use an Ethernet cable and connect the networking devices wisely now.
- Bring Extender Closer to Router
In case you have to connect the extender to the router using a wireless connection only, then it is important that you are placing the TP-Link range extender within the router’s range. So pull the devices closer now but do not place them very close either. You got to choose an appropriate distance between them.
- Disconnect Extra Devices
Perhaps there are multiple devices in your home that are accessing the network of the TP-Link WiFi range extender. Do you know a limit is set that tells you how many devices should be connected to the extender network at one time? If you have connected more than the required amount of devices, this causes network traffic. We suggest you disconnect some extra devices from the network and you will immediately experience the network improvement.
- Reboot TP-Link Extender
Sometimes some temporary glitches with the extender stop you from getting the expected WiFi performance. Thus you need to fix them right away. You can do this by giving your extender a new start i.e. by rebooting the TP-Link extender. Simply, power off the extender and disconnect it from the power source. After a while, plug the extender back into the power source and turn the power supply on. Once done, when the extender is powered up completely, see if the download, as well as internet speed, has been boosted or not.
- Update Firmware
Outdated firmware on the TP-Link extender is yet another reason that can hamper the internet speed drastically. You need to keep the firmware of the extender updated all the time to get better WiFi. So, access the TP-Link extender admin panel right away to check if any firmware update is pending. If it is then update the extender instantly by downloading the firmware and installing it on the extender.
This is all about how to improve the TP-Link download and internet speed if it is poor. If these troubleshooting hacks haven’t been of any help then reset the TP-Link extender to the factory settings and set it up again. If you do not know how to set up TP Link extender, then refer to the user manual to get the info.