In case you recently purchased a Linksys router, have set it up via Linksys router IP address, and now want to make your client devices access its network, you need to connect to its SSID or network name. What is that? Are you not able to do the same? Well then, this article is right for you. Here, you will the reasons why the network name of your Linksys router is not visible on the network list and what you can do about fixing the issue at hand. With that said, continue reading.
Is Linksys Router SSID Not Visible? Why?
1. Virus-Infected PC
Let us start with the first reason why you are experiencing the Linksys router network name not visible on the network list issue, i.e. virus-infected PC. Your computer might have gotten infected with viruses because you accessed a website on it that you should not have or connected to an already infected device.
2. Too Much Distance
Another reason why you cannot login to Linksys router for the setup process is too much space is separating the networking device. Here, by networking devices, we are talking about your Linksys wireless router and the existing modem. Due to this reason, signal transmission is not happening.
3. Damaged Cable Used
Check the Ethernet cable which you have used to connect the router to the modem. Did you find any damage? Does the cable have cuts? If yes, then it means that the connection between the networking devices is loose instead of being finger-tight. Apart from this, chances are that the ports are damaged as well.
4. Technical Glitches
The last reason why the Linksys router network name is not visible on the network list issue is not letting you access the internet on your client device because of technical glitches. Worry not; these glitches have a habit of coming on their own. Do not blame yourself that something going wrong from your end.
How to Make Linksys WiFi Router SSID Visible?
1. Get Rid of Viruses
The first thing that you can do to resolve the Linksys router network name not visible on the network list issue is to get rid of viruses. For this, you need to install one of the best antivirus applications or software on your client device. If you need our suggestion, then download either McAfee or Bitdefender. They are known to be the best antivirus apps right now in the market. If you do not believe us, then try them out for yourself.
2. Reduce the Distance
In case you are still experiencing the Linksys router network name not visible on the network list issue, then reducing the distance between the existing modem and the Linksys router will prove to be beneficial for you. It is recommended that when you are reducing the distance, you do not place the devices too close to each other. Otherwise, their signals will clash and you will end up facing more technical issues in the future.
3. Buy a New Ethernet
As mentioned above, a damaged Ethernet cable is another reason why you are in this mess. So, what can be done is that you get rid of the existing cable by buying a new one. Make sure that the new cable is not damaged, establish a finger-tight connection this time between the devices, and see to it that the Ethernet ports located on them are not broken or dusty. Now, check if you can set up the device via myrouter.local or not.
4. Restart the Router
Considering you are walking through this hack can only mean one thing, i.e. you are still experiencing the Linksys router network name not visible on the network list issue. This might be because of the existence of technical glitches. To get rid of them, you need to restart your networking device. To do so, you just need to power OFF and ON your device. Do not forget to hold on for about 30 seconds in the middle.
The Bottom Line
These were the troubleshooting tips through which you will be able to resolve the Linksys router network name not visible on the network list issue. In case you do, then waste no more time sharing your feedback with your fellow readers via the comment section. They will surely like this little effort made by you.