TP Link WiFi extenders have made everyone’s life easy by providing a lag-free internet connection throughout their homes. However, like any other WiFi device, TP Link WiFi extenders are also prone to technical issues. And, one of the most common yet major issues that every TP link extender user encounter with is that they often see red LED on their devices even after performing the TP link extender setup process correctly.
But, you don’t have to worry! We have come up with this TP link troubleshooting guide. Here, you will get to know all the possible fixes that will help you resolve TP link extender red light issue in a fly. Let’s get the ball rolling!
Fix: TP Link Extender Red Light Issue
Fix 1: The Power
Make sure that your TP link WiFi extender is properly plugged in.
The extender’s power socket must not be damaged or short-circuited.
Besides, ensure that the extender’s power adapter cables are well working.
Fix 2: The Connection
- Is your TP link range extender’s power adapter plugged in properly? Ensure this and after that – grab an Ethernet cable and connect the extender to your router. Do not make use of damaged or dusty Ethernet cable.
- If you don’t have a well-maintained Ethernet cable, drop all your worries and connect the devices using a wireless source.
- Bear in mind – loose or improper connection between your TP link WiFi range extender and router may also lead you to experience the red light issue.
- Make sure to establish a solid and secure connection between your TP link extender and router.
Fix 3: The Extender Placement
- If you place your extender away from the reach of your router, then you will surely experience the red light issue. Therefore, it is important to keep your devices within reach of each other.
- Moreover, for TP link troubleshooting red light issue, we suggest you keep your extender at the center-most location in your home and that too away from the range and reach of interference-creating WiFi devices/networks.
Fix 4: The Configuration
In the event that you haven’t completed the TP Link extender setup process, then also red light issue will come into view. Therefore, to make the most out of your TP link extender, ensure to configure it properly. For instructions, refer to the device manual or navigate to TP link WiFi extender login page.
Fix 5: Outdated Firmware
If the firmware version on your TP link WiFi range extender is outdated, then also it is obvious to deal with red light issue. So, it is important for you to get the latest version of firmware updated on your TP link WiFi extender.
To get the job done, navigate to the device’s official site or the TP link WiFi extender login page for getting step-by-step on-screen instructions regarding the same.
Fix 6: Your Extender Is Overheated
Chances are that your TP link WiFi range extender is overheated and due to which you are getting red light issue on your device. To get it fixed, simply power cycle your TP link extender. For this:
- Disconnect the TP link device from your main router.
- Unplug the extender from the power outlet.
- Wait for a few minutes.
- Plug the TP link extender back in.
- The power LED on the device will become green and stable shortly.
Bonus: To get the most out of your TP link extender, we suggest you place your TP link WiFi extender in an open area and over a higher surface and that too must be clean and free of dust.
In a Nutshell
So, our article on how to fix TP link extender red LED issue ends here. Please feel free to share your feedback with us – if the troubleshooting tips provided in this piece of writing proved helpful to you. Moreover, if you need more help regarding the same, let us know via comments.