Along with the Netgear Orbi purple and white light issue, many users have been facing the Netgear Orbi blue light issue. Are you also going bonkers because of the same issue? Is this issue troubling despite a successfully Orbi setup via orbilogin.com? Nodding your head in yes? Well, worry not. You are not the only one who is experiencing this issue. There are plenty of other users who are stuck with the same.
To troubleshoot it, walk through the troubleshooting hacks mentioned in this article. Surely one of them will be able to rescue you. Thus, get down to reading.
[Resolved] Netgear Orbi Blue Light Issue
- Power Cycle the Orbi Device
Start troubleshooting the Netgear Orbi blue light issue by power cycling or restarting your Netgear Orbi router. For this, follow the instructions mentioned here:
- Power off your Orbi and unplug it from its wall socket.
- Count from 1 to 10.
- After that, reverse the first step.
Now, check if the LED on your Netgear Orbi router has turned from blue to green. In case, it has not, then you should walk through the next troubleshooting hack. Just because one hack could not help you does not mean that the others will do the same.
- Eliminate Signal Interference
This troubleshooting hack recommends you change the location of your Netgear Orbi device to keep WiFi interference at bay because perhaps your Orbi device is kept in a room that is filled with signal interference things. Some examples include mirrors, fish tanks, cordless phones, treadmills, microwave ovens, televisions, refrigerators, baby monitors, washing machines, Bluetooth speakers, and aluminum studs.
Apart from these things, keep the Netgear Orbi device away from thick walls. They can completely block the signals emitted from them.
- Pull the Orbi Devices Closer
Another thing that you can do to troubleshoot the Netgear Orbi blue light issue is to pull the networking devices closer. By networking devices, we are talking about the Orbi router and the existing modem, not the Orbi router and the satellite.
However, do not place them too close. Otherwise, the signals emitted from them will clash and you will get stuck with more technical issues in the future. If you do not want that to happen, then it is recommended that you maintain a safe distance between the devices, i.e. neither too less nor much.
- Update the Netgear Orbi
In case you are still experiencing the Netgear Orbi router, then you should consider updating Orbi firmware. You can execute this process with the help of two methods namely the Manual method and using the Netgear Orbi application.
If you want to know in detail how to perform Netgear Orbi firmware update, then it is recommended that you refer to the instructions given in the user manual of your networking device. Trust us, this will help you ton!
- Check the Cable Connection
Are you still experiencing the Netgear Orbi blue light issue? Well, it might because of a loose cable connection. A loose cable connection between the Orbi router and the existing modem can be caused because of two reasons.
The first reason includes a worn-out cable and the second reason includes damaged Ethernet ports. In the first case, you should replace the worn-out cable with a new one, and in the second case, consider getting the ports repaired.
- Perform Factory Default Reset
Despite following all the troubleshooting hacks mentioned in this article, are you still a victim of the Netgear Orbi blue light issue? Well, it might be because your networking device is not configured properly after all. To take care of the problem, you need to reconfigure your Orbi router.
But, before you do that, you need to restore your Orbi router to its default factory mode. You can do this by pressing the Reset button on the Orbi router. Once done, use the WPS method, Manual method, or the Orbi application to set up your networking device.
Are you not sure of the process to configure your Orbi device? Well, in that case, referring to the guidelines given in the user manual will do you some good.
Final Thoughts
These were the troubleshooting tips through which the Orbi blue light issue can be fixed. We anticipate that we were able to help you to fix it with their help. Apart from the ones mentioned above, if you are aware of any other hack through which the Orbi blue light issue can be resolved, do share it with your fellow readers via the comment section.