Netgear Genie Keeps Appearing on Browser? Let’s Fix It!

After you log in to your Netgear wireless range extender, you reach a page named Netgear Genie setup wizard. Whether you are doing the setup for the very first time or are trying to make any changes to the settings, you need to access the Netgear Genie page. It sometimes happens that whenever you open a browser, the Netgear Genie page keeps reappearing. This means there is something wrong with the Netgear extender that you need to address right now. What it could be and what you are supposed to do about it, find in this article.

How to Fix Netgear Genie Keeps Reappearing Issue?

Power Cycle Your Extender

We want you to commence the troubleshooting process by rebooting or power cycling the Netgear WiFi range extender once or maybe twice. This simple process has the ability to fix some minor to major technical bugs with the device. So, without further delay, power off the Netgear extender by turning off its power button. Unplug it from the wall socket. After waiting for a couple of minutes, connect the power plug back to the socket and turn on the power button. Once rebooting is completed, try to check if the issue has been fixed or not.

Update the Browser

If the issue still exists then update the browser that you are using right now. You need to access the settings of the browser for this. Once the browser is updated if the issue is fixed then fine, you can stop the troubleshooting process here. Else, try the next hack now.

Clean the Browser

Accumulated junk files on the web browser can also be the reason behind the issue at hand. The cache is meant to help load the pages faster. But this can also cause certain issues with the web browser. So clean the browser now by flushing out the cache, cookies as well as browsing history.

Use Alternative Browser

You can also try an alternative browser and see if the issue exists with other browsers as well. Perhaps it is the current browser is not supported by the Netgear login page which is why you are facing the issue. If you do not have any other browser installed on your PC then consider installing one now.

Install an Antivirus Software

Is the issue still troubling you after you have performed all the steps mentioned above? Looks like your PC is infected with virus. We recommend you to install antivirus software on it right now and clear out the virus. Once the virus is cleared, try accessing the extender login page using the default IP address You should be able to log in and Netgear Genie keeps appearing issue should have been fixed now.

Reboot the Computer

Why don’t you try rebooting your computer or laptop now? This can also be troubled by some technical glitches and so you are getting the Netgear Genie page again and again on the browser. Power off the PC and give it some time to rest. After some time, turn it on again and load an internet browser. Access the Netgear extender login page now.

In a Nutshell

We have tried covering every step that will help you fix the issue-Netgear Genie keeps appearing on the internet browser. We are sure these hacks have proved to be useful to you and you are no more getting the same page again and again. If you still are troubled by the same then reset your extender to the factory settings. You can do this by pressing the Reset button on it.

Once you have reset your extender, you will again need to set it up from scratch using any preferred method. After setting it up, update its firmware to the most recent version to avoid any such issue in the future. You need to download the firmware file on your PC first and then access the Netgear extender login page using the web address or the default IP address and install the firmware file on the extender.