Wavlink extender is an incredible networking device as it is helpful to extend the home network throughout the apartment. It has many flawless features that enhance the internet experience. But, to get the best out of the extender you need to keep its firmware updated. Because update firmware gives the many benefits to the device in other words it enhances the overall performance.
If you are unaware of how to update the extender by accessing the ap. setup Wavlink login page, then this article is for you. In this post, we will highlight all the important steps to update the Wavlink extender. Keep reading!
Well, first we would like to tell you about the essential need that you will require during updating the firmware of the extender. Prepare all the things before the process will assist you.
Important Requirements
-
Good and reliable internet connection.
-
Sufficient power supply from the electricity source.
-
Computer or laptop.
-
Update the internet browser.
-
The default web address of the extender.
-
Admin details (Password)
These were the requirements that you need to get prepared to updating the firmware of the extender. Now, let’s move to the next section in which we explained all the steps.
Steps to Update Firmware of Wavlink Extender
Turn on the Extender
The very first thing you need to do is plug the extender into the working wall outlet which supplies the fluctuation-free power supply.
Now, push the start button until the device is booted up.
Connect the Extender to Router
Now, you need to take the quality Ethernet cable in your hand to make the wired connection between the extender and router. We recommend you Ethernet cable because it reduces the chances of disconnection and makes a strong connection as compared to wireless.
Switch on the Computer or Laptop
To power up the device plug it into the good-condition wall outlet and press the start button. You can use the UPS to give the battery backup in case of an electricity cut.
Launch Internet Browser
Once the device is booted up, you need to open the internet browser in it for the further process. Use the updated browser for the process because the outdated browser does not give positive outcomes.
Plus, try to keep the browser clean from extra files like cache and cookies because it corrupts the internal files of the device.
Access the Default Web Address
Now, it’s time to access the default URL of the device that was used the first time to perform the Wavlink setup. To access it you need to type it into the URL bar of the browser without typos.
If you are forgotten or are not able to remember the default web address, then take the help of the user manual that came with your device. The user manual contains all the default details of the extender.
Once you insert the URL into the address bar, press the Enter key.
Log Into Extender
The login panel of the Wavlink extender will appear on your screen in which you need to fill in the default admin details if you not changing it.
While typing the details make sure the caps lock key of the keyboard is off because sometimes in a hurry users type the wrong details.
Thereafter, click on the LogIn Button.
Update Wavlink Extender Firmware
The dashboard of Wavlink extender is open, in which you need to perform the sub-steps that are mentioned below:
-
Go to the Menu Settings.
-
Click on the Advanced Settings.
-
Select Administration Settings.
-
Look for the Firmware Update.
-
The Firmware Update panel will appear.
-
Now, you need to follow the on-screen prompts to complete the update.
This is how you can update the firmware of the Wavlink extender in a hassle-free manner. Once the device is updated successfully, you will get the best outcomes from the device and enjoy the fast blazing internet speed.