netgear router

Here’s Why Your Netgear Router is Not Broadcasting WiFi

If your Netgear router is not broadcasting WiFi, then its major reason might be the disabled SSID broadcast. Thus, we suggest you access the setup URL on a computer sharing a cable connection with the Netgear router and enable the SSID broadcast. For detailed instructions, you need to walk through the next section.

How to Enable Netgear Router SSID Broadcast?

Enabling the SSID broadcast of your Netgear router is not a rocket science. You will only get your hands on a computer and an Ethernet cable to complete the task.

  • Power up your computer and cable it to your Netgear WiFi router.
  • After that, access with the help of an upgraded web browser.
  • Complete the login process using the default admin info and reach the router’s Status page.
  • You have to find the Wireless Settings section and check the Broadcast this Network box.
  • Save the changes.

On the off-chance, the SSID broadcast is already enabled on your router or nothing happens after following the instructions mentioned above, you are suggested to walk through the techniques given ahead.

Fixed: Netgear Router Not Broadcasting WiFi

Sometimes, the WiFi router does not broadcast its SSID or WiFi because of minor network errors. Therefore, before you attempt to fix the issue with the help of other techniques, you are advised to perform a power cycle of the router. If you have any confusion related to the steps, you can take the help of the below-given points:

  • Disconnect the router from the modem and unplug it from the respective power outlet.
  • You are now supposed to wait for a few minutes.
  • Plug the router back into its power outlet and connect it back to the modem.

Now, refresh the network list on any client device present in the router’s WiFi range and check if it has started broadcasting WiFi or not. If not, then move to the upcoming hacks.

Solution 1: Update the Firmware

The outdated version of the router’s firmware can also stop it from broadcasting the SSID. In light of the same reason, you should install the latest firmware version on your WiFi router. So, again connect your computer to the Netgear router through an Ethernet cable and follow the steps mentioned below:

  • Before anything else, visit the Netgear download center.
  • Download the newest firmware file corresponding to your router model.
  • Once done, access the WiFi router login address (web or IP).
  • Complete the login process and locate the Maintenance tab.
  • Select Firmware Update > Upload.
  • Find the firmware update file you downloaded and upload it.
  • Do what the screen suggests.

In this manner, you can upgrade the WiFi router to the latest firmware version. This is for your general information that the firmware must be upgraded as soon as a new version is rolled out by the company. Otherwise, you might face the not working issue during the router management process.

Solution 2: Check the Router’s Placement

There are times when the router fails to broadcast the WiFi due to a heavy amount of interference-creating factors around it. Therefore, you should check the surroundings of your Netgear router and relocate it if it is found placed near the following:

  • EM waves emitting devices: Televisions, microwave ovens, refrigerators, baby monitors, etc.
  • Reflexive surfaces and metals: Mirrors, metal objects, glasses, lenses, and objects with metal polishing.
  • Objects containing water: Aquarium, geysers, reverse osmosis systems, and air coolers.

Aside from this, you are not recommended to place the router close to a thick concrete wall or in a corner.

Quick Tip: If you wish to make your router 100% efficient, then you have to connect only a limited number of devices to its network. It will prevent the router from falling victim to technical glitches. In addition, you should look forward to enabling advanced features like Netgear Smart Connect and the Coexistence of 20/40 MHz frequency band.

The Conclusion

Wireless devices won’t be able to connect to the network if the Netgear router is not broadcasting WiFi. Hopefully, with the help of the tactics given here, you will be able to address the issue and connect to WiFi. Otherwise, the final hack of resetting the router and setting it up from scratch can be given a shot.