Rockspace extender red light issue has been playing with the patience of a number of users nowadays. Are you not able to handle this issue anymore and are looking for solutions to troubleshoot it as soon as possible? Well then, thankfully, you have landed on the right post. Here, we have discussed the hacks through which you will easily be able to turn the color of the LED located on your wireless range extender to green.
For your information, keep the Rockspace WiFi extender login credentials near. Chances are that you might have to make use of them in one or two of the troubleshooting hacks.
[Fixed] Rockspace Extender Red Light Issue
- Check the Wall Socket
An improper power supply is the topmost reason why the LED on your Rockspace wireless range extender is flashing red. This might be because the electrical outlet is damaged. To get the issue fixed, you ought to repair the wall socket. Therefore, call up an electrician.
After getting the wall outlet repaired, it is recommended that you check if the issue at hand has been resolved. On the off chance, experiencing it is still on your plate, you ought to rotate your eyeballs and go to the next troubleshooting hacks.
- Tape Up the Ethernet Cable
Did you use an old Ethernet cable to connect the Rockspace wireless range extender to the existing router or the new one that came along at the time of purchase? If it is the first option, then you just found out another reason behind the issue at hand.
Old cables can become worn out or damaged over time. Taking this into consideration, tape up the Ethernet cable. If you want a long-term solution, then connect the networking devices with the assistance of a new and non-damaged Ethernet cable.
- Pull the WiFi Devices Closer
By any chance, if too much distance is between your networking devices, then it means one thing, i.e. the signals emitted by them are not getting transmitted properly thereby forcing the LED on the Rockspace wireless range extender to flash red.
Thus, you need to pull up the devices closer. But, only a tad bit. The reason being, moving them too close can make their signals clash and disable you from turning the blinking red LED on your Rockspace wireless range extender to green.
- Update the Extender Firmware
Are you still not able to troubleshoot the Rockspace extender red light issue? Well, that might be because your networking device is functioning on an outdated firmware version. Know that an outdated firmware can also degrade the performance of your device if it is not updated on time.
Keeping this thing in mind, it is recommended that you do the only thing needed right now, i.e. Rockspace extender firmware update. For your information, in order to execute the process, you ought to make use of the login password and username.
- Reset the Range Extender
Did none of the aforementioned troubleshooting hacks help you to resolve the Rockspace extender red light issue? Well, then it means that you did not configure your networking device properly. Thus, reconfigure your wireless range extender right away.
But, before you can do that, you need to reset Rock space WiFi extender. You can do so by pressing the Reset button on the extender. If you do not want to make use of this method, then you can make use of the manual method. For that, you need to access the web user interface of your wireless range extender.
Right after the reset process comes to an end, you have got to reconfigure your device. For the instructions regarding how to execute the process, only one place can be taken as a good reference, i.e. the user manual of your Rockspace range extender.
These were some of the topmost troubleshooting hacks following which you will be able to put an end to the Rockspace extender red light issue. Hopefully, one of them was able to help you to fix the issue at hand.
What do you think about this article? Was it worth your time? Whether your answer is a yes or no, do share it with your fellow readers. Now, you might wonder how that can be done. Well, a simple use of the comment section is required.
All you need to do is type in what you have to say in the comment section, and then, click on the Enter key located on the keyboard of your computer or laptop.