Escape from Tarkov is a demanding game, even on PCs with high-end hardware. This is because the most critical graphics settings are set dynamically depending on your PC’s hardware. As a result, it’s hard to say which PC hardware will be capable of smooth gameplay.
With more than 1.5 million copies sold, Escape from Tarkov is one of the most anticipated MMO fps games in recent years. However, it’s also a game with a steep learning curve and high requirements for PC performance. The following details are given to help you get started in Escape from Tarkov and provide you with some fundamental knowledge about various eft hacks, tips, and tricks.
- No Need to Turn on Antialiasing
If you’re frustrated by the appearance of jaggy lines in your gameplay, you should get rid of Antialiasing completely. Antialiasing is a relatively resource-sapping technology which smoothes the edges of objects. The Escape from Tarkov developers had to sacrifice image sharpness for performance, so there’s no need to enable Antialiasing and use additional resources. To avoid jaggy lines and make the image more pleasant to the eye, you can use Supersampling in your video card settings.
- Disable Vertical Synchronization
FPS games usually require high refresh rates from monitors. The vertical synchronous display (V-Sync) is the cause of most performance issues. The V-Sync is enabled and displays new frames in a sequence by default. This rule does not affect the refresh rate. In other words, the edges are produced in advance, even if your PC can’t display them. Disable V-Sync in the Escape from Tarkov Options, and you will see an improvement in your FPS.
- Use Ultra Settings
Most users are accustomed to playing games at very high settings, but this can result in many problems with modern GPUs. Usually, you can still get around 60fps at high settings, but the picture will be slightly blurred due to the low GPU speed. For this reason, you should use a higher resolution and set the graphics settings to Ultra. However, escape from Tarkov has been designed for very high graphics settings, so don’t overdo it.
- Enable V-Sync
It is the best solution for turning on V-Sync in Escape from Tarkov. It’s straightforward, so don’t hesitate to turn it on. It’s an excellent solution for AMD users (not for Nvidia) because the game works fine with no issues if V-Sync is off. Go to the game settings and tick the “Vertical Synchronization” box to enable V-Sync. However, disabling V-Sync means that your GPU will have to render every frame of your gameplay, which can cause performance issues.
- Maximize Your FPS
Ensure that your framerate monitor is set above 60 fps for maximum performance. For this, you need to tweak the settings in Escape from Tarkov Options. To reach the maximum FPS, you will have to adjust the graphics options the way you want, for which you can consider suing eft hacks for your ease. Please pay special attention to the models of weapons, characters and locations, and their visual effects. On a good PC, you should be able to get well over 100 fps at 1080p resolution, but don’t expect more than 120 fps for higher resolutions.
- Use Multi-Monitor Setups
Setting up a multi-monitor configuration for Escape from Tarkov can help you improve your gaming experience. As of now, it’s not possible to use any of the monitors in this game as additional displays, but it’s entirely possible to make them work simultaneously with your primary monitor. Furthermore, everything you see from these monitors will be displayed simultaneously, so try to keep them away from each other as possible.
- Graphic Settings
Try lowering your graphics settings if you’re using a high-end GPU and still can’t play Escape from Tarkov smoothly. The game itself is set to High, but you can lower it down to Medium and low settings. Your GPU will have time to render all the necessary graphics, and the FPS will be stable. It’s better to set the graphic settings carefully so your framerate doesn’t go below 60 fps or even 30 fps.
- Consider a DDU Cleaner
Using a DDU Cleaner is the only way to clean all the system drivers when manufacturers themselves remove them. You will need to install the drivers manually after they have been removed. DDU Cleaner is a great application that will help you clear your drivers and make the system startup faster after removing the drivers manually. If your framerate is low, there’s a perfect chance that this is because of poor graphic settings.
- Graphic Card Overclocking
Overclocking is an advanced technique for increasing the performance of video cards, and it’s also known as GPU Boost 3.0 in Escape from Tarkov. You can get more versions out of your video card if it is capable of Overclocking. The most crucial aspect is to have a stable PC since Overclocking can also cause other issues. First of all, you will have to go to your video card settings and enable the option that says, “Overclock”. It would provide aid if you started with a low voltage. You should look for information about Overclocking and read the manual of your graphics card before proceeding.
- Don’t Underestimate Your FPS.
Many players are frequently annoyed that their Escape from Tarkov FPS is low, and they believe that there’s still a lot of room for improvement. However, you should also pay attention to the number of FPS displayed. If your system cannot reach 60 fps, make sure that your monitor can handle this resolution. Most players choose settings so high that their graphics card cannot keep up with them, and this is why their FPS drops below 60 fps at times.
Escape from Tarkov is a beautiful game with great eft hacks, and there’s a lot of potential for future development. When it comes to FPS, players might experience occasional issues, but they are not vital to the game itself. The game will be hard to play without them, but you can’t avoid them. What you can do is lower some visual settings through their options menu.